Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Join VPLS and EoMPLS circuit together

Hi All,


I have ASR1006 IOS-XE as PE router at that have connected to other PE with same model. And I have VPLS established to provide E-LAN service. Multiple GE interface at both site have joined this VPLS group. Now that we have another PE(ISR G2 Router, for small scale use) that need to join this VPLS group. Since ISR G2 IOS do not support VPLS , we can only achieve EoMPLS(E-LINE) service. 

Is there any way to Interconnect VPLS and EoMPLS.  Referring to below configuration example, can I make Service-Instance 110 as member in Bridge-Domain 10 ? Is that would eventually interconnect EoMPLS to VPLS ? All router currently in production. Any idea would be much appreciated. 


l2vpn vfi context VFI-TEST                                        // VPLS
 vpn id 10
 member encapsulation mpls


bridge-domain 10 
 member GigabitEthernet0/0/0 service-instance 101
 member GigabitEthernet0/0/0 service-instance 102
 member GigabitEthernet0/0/0 service-instance 103
 member vfi VFI-TEST

interface GigabitEthernet0/0/0
 service instance 101 ethernet
  encapsulation dot1q 101
  rewrite ingress tag pop 1 symmetric
 service instance 102 ethernet
  encapsulation dot1q 102
  rewrite ingress tag pop 1 symmetric
 service instance 103 ethernet
  encapsulation dot1q 103
  rewrite ingress tag pop 1 symmetric
 service instance 110 ethernet
  encapsulation dot1q 110
  rewrite ingress tag pop 1 symmetric
  xconnect 10 encapsulation mpls                 // EoMPLS 

Regards, Nagis
Everyone's tags (2)