Joining 2X2 Mbit link on two different cisco routers

[sahuravi20]

I have two 2 Mbits link terminating on two cisco 2621 routers.Is it possible to combine both the links on different routers to achieve 4 Mbits speed?This way possibly we can have redundancy in routers and redudancy in link as well and at the same time achieve a higher bandwidth.

If this is possible,can somebody provide a sample configurarion.

Many Thanks in advance

[olorunloba]

The are a number of things you could do.

1. You can configure your routing protocols to load-balance across the two links.

2. You can configure Mulitilink PPP

3. You can configure Multilink Frame

Check

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_white_paper09186a0080091d4b.shtml

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080430ac3.html

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804a40f9.html

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804554eb.html

[ktcisg]

Thanks. I have configured NxT1s before. I just didnt know if these routers could handle it.