Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Just curious about BGP timer

I thought when BGP either up or down, it would start the counter. Today, the result showed "never". I am just curious about it.

Is that mean the counter never able to start?

Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd

10.139.229.1 4 13979 0 0 0 0 0 never Active

2 REPLIES

Re: Just curious about BGP timer

According to your output you are not establishing a BGP connection! Under State/PfxRcd there should be a number. Active means it still trying to establish the TCP session. Here's a good troubleshooting doc to help.

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009478a.shtml

HTH and please rate.

New Member

Re: Just curious about BGP timer

"never" means that the BGP session with the neighbor has not been established since the last reload.

157
Views
2
Helpful
2
Replies
CreatePlease to create content