Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

karthik (support for router config)

i need to access the host in  MPLS network from the internet

3 REPLIES
New Member

we have more than 35 branches

we have more than 35 branches in india, all are interconnected with MPLS network. These links are connected with our core router 2811. We using 1841 for internet line. Our requirment is to enable port forwarding technique to get the video conferencing machine from one our branch through internet.

Hi karthik ,                

Hi karthik , 

                   How is Internet supported for all this 35 Branches , do you have common internet gateway ?? / each branches has got individual internet gateway .

                You can do Port NATING /Static NAT (better do static NAT because VC uses random user defined port )on your internet router for your Internal host/VC unit .  If you have common internet gateway for all 35 location , ensure Qos is done from your Branch office where you have VC unit to your head office where you have internet gateway . 

 

Let me know if you need further support 

 

HTH

Sandy

 

New Member

This discussion has been

This discussion has been reposted from Cisco Support Community Olympics Trivia to the WAN, Routing and Switching community.

26
Views
0
Helpful
3
Replies