Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

L2TPv3 issues

        Hello

I am to setup a setup something like this:

Wanted to check to pass all the VLANs 100, 200, 300, 400 do I have to create subinterfaces on RTR A and RTR B for each of the VLANs and create xconnect with different cirucit id to pass all the VLANs or am i thinking on the wrong path?

Something like this

RTR A

interface FastEthernet0/1.100

description DATA1

encapsulation dot1Q 100

xconnect 1.1.1.2 10201301 pw-class A.PW.to.B

interface FastEthernet0/1.200

description DATA2

encapsulation dot1Q 200

xconnect 1.1.1.2 10201302 pw-class A.PW.to.B

interface FastEthernet0/1.300

description DATA3

encapsulation dot1Q 300

xconnect 1.1.1.2 10201303 pw-class A.PW.to.B

interface FastEthernet0/1.400

description DATA4

encapsulation dot1Q 400

xconnect 1.1.1.2 10201304 pw-class A.PW.to.B

Any advice will be much appreciated

Many Thanks in advance

1 REPLY
New Member

Re: L2TPv3 issues

Any ideas on this please?

I have attached the drawing of the setup.

94
Views
0
Helpful
1
Replies
CreatePlease to create content