09-10-2013 07:57 AM - edited 03-04-2019 08:59 PM
Hi All,
I am trying to establish L2TPv3 VLAN-to-VLAN based pseudowire between Cisco NPE-G2 and ASR 9001 routers but could not bring the pseudowire up and end to end reachability.
Below are the configuration:
ASR:
RP/0/RSP0/CPU0:LAB-ASR1#sh run l2vpn
Tue Sep 10 22:50:02.204 UTC
l2vpn
pw-class test
encapsulation l2tpv3
protocol l2tpv3 class test
ipv4 source 10.10.10.103
transport-mode vlan
!
!
xconnect group l2tpv3
p2p lab1-2
interface GigabitEthernet0/0/0/1.101
neighbor 10.20.0.3 pw-id 100
pw-class test
!
!
!
!
RP/0/RSP0/CPU0:LAB-ASR1#sh run l2tp
Tue Sep 10 22:50:10.190 UTC
l2tp-class test
authentication
password 7 095F470F00544541
!
RP/0/RSP0/CPU0:LAB-ASR1#sh run int gi 0/0/0/1.101
Tue Sep 10 22:50:18.071 UTC
interface GigabitEthernet0/0/0/1.101 l2transport
encapsulation dot1q 101
!
NPE-G2:
l2tp-class test
authentication
password 7 071C284A57584B56
!
pseudowire-class test
encapsulation l2tpv3
protocol l2tpv3 test
ip local interface Loopback0
CE1-NPEG2#sh run int gi 0/3.101
Building configuration...
Current configuration : 106 bytes
!
interface GigabitEthernet0/3.101
encapsulation dot1Q 101
xconnect 10.10.10.103 100 pw-class test
end
CE1-NPEG2#
Have anyone tried L2TPv3 between IOS and ASR 9001 and working?
thanks in advance
Arun
01-28-2014 09:42 AM
Hello,
did you ever solve this issue?
I'm trying to do the same, without any luck.
l2vpn
pw-class AC
encapsulation l2tpv3
protocol l2tpv3 class AC
ipv4 source 192.168.255.236
transport-mode vlan
!
!
xconnect group l2tpv3
p2p LINX
interface TenGigE0/0/0/0.210
neighbor ipv4 192.168.255.232 pw-id 210
pw-class AC
!
Tue Jan 28 10:39:36.310 UTC
Legend: ST = State, UP = Up, DN = Down, AD = Admin Down, UR = Unresolved,
SB = Standby, SR = Standby Ready, (PP) = Partially Programmed
XConnect Segment 1 Segment 2
Group Name ST Description ST Description ST
------------------------ ----------------------------- -----------------------------
l2tpv3 LINX DN Te0/0/0/0.210 UP 192.168.255.232 210 DN
----------------------------------------------------------------------------------------
Regards,
Nuno
09-24-2014 08:23 AM
Hi Arun/Nuno,
As I just got update from Cisco ASR 9000 doesn't support l2tpv3 over IPv4 please try it over IPv6.
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.3/lxvpn/configuration/guide/lesc43p2ps.html#wp1298172
Regards, Pok.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide