Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

L3VPN on Cisco ASR9001 IOS XF 4.3.1 (PE router)

Hi all,

I need to know if this configuration is correct on Cisco ASR 9001 to have L3VPN.

This CISCO should be a PE router (other PE router is in another Autonomous System).

RP/0/RSP0/CPU0:ASR9001-2#sh running-config
Mon Oct  6 06:11:16.434 UTC
Building configuration...
!! IOS XR Configuration 4.3.1
!! Last configuration change at Sun Oct  5 08:23:50 2014 by admin
!
hostname ASR9001-2
telnet vrf default ipv4 server max-servers 100
ptp
 clock
  domain 1
 !
 profile 1
  multicast
  transport ethernet
  port state slave-only
  clock operation two-step
 !
 profile 2
  transport ethernet
 !
!
vrf vpnv4
 address-family ipv4 unicast
  import route-target
   65000:111
   65001:111
  !
  export route-target
   65000:111
  !
 !
!
interface Loopback0
 ipv4 address 10.85.0.67 255.255.255.255
!
interface Loopback1
 vrf vpnv4
 ipv4 address 2.2.2.2 255.255.255.255
!
interface MgmtEth0/RSP0/CPU0/0
 shutdown
!
interface MgmtEth0/RSP0/CPU0/1
 ipv4 address 10.44.107.35 255.255.255.128
!
interface GigabitEthernet0/0/0/0
 shutdown
!
interface GigabitEthernet0/0/0/1
 ptp
  profile 2
 !
 shutdown
!
interface GigabitEthernet0/0/0/2
 shutdown
!
interface GigabitEthernet0/0/0/3
 shutdown
!
interface GigabitEthernet0/0/0/4
 shutdown
!
interface GigabitEthernet0/0/0/5
 shutdown
!
interface GigabitEthernet0/0/0/6
 shutdown
!
interface GigabitEthernet0/0/0/7
 shutdown
!
interface GigabitEthernet0/0/0/8
 shutdown
!
interface GigabitEthernet0/0/0/9
 shutdown
!
interface GigabitEthernet0/0/0/10
 shutdown
!
interface GigabitEthernet0/0/0/11
 shutdown
!
interface GigabitEthernet0/0/0/12
 shutdown
!
interface GigabitEthernet0/0/0/13
 shutdown
!
interface GigabitEthernet0/0/0/14
 shutdown
!
interface GigabitEthernet0/0/0/15
 shutdown
!
interface GigabitEthernet0/0/0/16
 shutdown
!
interface GigabitEthernet0/0/0/17
 shutdown
!
interface GigabitEthernet0/0/0/18
 shutdown
!
interface GigabitEthernet0/0/0/19
 shutdown
!
interface TenGigE0/0/1/0
 mtu 9216
 shutdown
!
interface TenGigE0/0/1/1
 mtu 9000
 ptp
  profile p1
 !
 ipv4 address 10.85.52.5 255.255.255.252
!
interface TenGigE0/0/1/2
 shutdown
!
interface TenGigE0/0/1/3
 mtu 9000
 ipv4 address 10.85.52.1 255.255.255.252
!
interface TenGigE0/0/2/0
 shutdown
!
interface TenGigE0/0/2/1
 shutdown
!
interface TenGigE0/0/2/2
 shutdown
!
interface TenGigE0/0/2/3
 shutdown
!
router static
 address-family ipv4 unicast
  10.40.0.0/14 10.44.107.1
  141.0.0.0/8 10.44.107.1
 !
!
router ospf 1
 router-id 10.85.0.67
 mpls ldp sync
 mpls ldp auto-config
 area 0.0.0.0
  mtu-ignore enable
  interface Loopback0
   passive enable
  !
  interface TenGigE0/0/1/1
  !
  interface TenGigE0/0/1/3
  !
 !
!
router bgp 65000
 bgp router-id 10.85.0.67
 address-family ipv4 unicast
  network 10.85.0.67/32
 !
 address-family vpnv4 unicast
 !
 neighbor 10.85.0.71
  remote-as 65000
  update-source Loopback0
  address-family ipv4 unicast
  !
  address-family vpnv4 unicast
  !
 !
 neighbor 10.85.0.72
  remote-as 65000
  update-source Loopback0
  address-family ipv4 unicast
  !
  address-family vpnv4 unicast
  !
 !
 vrf vpnv4
  rd 10.85.0.67:111
  address-family ipv4 unicast
   redistribute connected
   redistribute static
  !
 !
!
mpls ldp
 router-id 10.85.0.67
 interface TenGigE0/0/1/1
 !
 interface TenGigE0/0/1/3
 !
!
ssh server v2
ssh server session-limit 100
end

 

57
Views
0
Helpful
0
Replies
CreatePlease login to create content