Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LAN overlapping + port forwarding.

Dear users,

Unfortunetlly my LAN addressing is 191.1.1.0/24.

I want to establish IPSEC VPN tunnel and I want to overlap this network

191.1.1.0/24 to 10.115.238.0/24

Remote IP is 10.116.40/32

Now I have also some port forwardings:

ip nat inside source static tcp 191.1.1.100 20 62.233.x.x 20 route-map r1 extendable

ip nat inside source static tcp 191.1.1.100 21 62.233.x.x 21 route-map r1 extendable

ip nat inside source static tcp 191.1.1.100 3389 62.233.x.x 3389 route-map r1 extendable

route-map r1 permit 1

match ip address 120

access-list 120 permit ip 191.1.1.0 0.0.0.255 any

How can I enable overlapping and still have port forwarding?

Regards

480
Views
0
Helpful
0
Replies