Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Lan Wan Lab

I'm working to connect all five routers including 3 2501, 1 2507 and a 1720 and I'm able to connect the serial ports with cross over cables, and even the Ethernet ports, but need some help to connect my 1720 Wic cards. I have two 56K csudsu Wic cards and would love to connect them into my network but I don't know how and need some help on the best way to make this happen. I'm willing to buy different Wic cards if I need to. I need the experts to help me because I'm lost on this. Thanks for the step-by-step help on this.


Re: Lan Wan Lab

The Cisco WIC-1ENET card requires Cisco IOS Release 12.2(2)XJ or later if the card is installed in any WIC slot other than slot 0 or if more than one card is installed.

The card can be used with Cisco IOS Release 12.2(4)T, but the card must be installed in slot 0 and only one Cisco WIC-1ENET card can be installed in the router.

Refer these links for configuration: