Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Large Scale Dialout (LSDO) with Freeradius / avpair for Bri

Hi!

We established a test environment for LSDO.

Components:
Cisco 1712 c1700-advsecurityk9-mz.124-3g.bin
FreeRADIUS Version 2.0.4

Question: Is there a (freeradius) "avpair" to assign the physical interface (bri) to the Dialer-Interface?

Everything else looks fine, NAS (Router) receives username/pw/dialoutnumber from Freeradius, but gets no connection to the physical interface...
Additional info: sgbp ist not configured.

Debug-output NAS (router):
Jun 21 14:27:41.084 CEST: RADIUS(0000007C): Send Access-Request to 172.x.x.x:1812 id 1645/62, len 61
Jun 21 14:27:41.084 CEST: RADIUS:  authenticator 8A FD 5A 7C 4A DA 4E C8 - 70 5B FF 68 B6 D9 71 FD
Jun 21 14:27:41.084 CEST: RADIUS:  User-Name           [1]   11  "test-out"
Jun 21 14:27:41.084 CEST: RADIUS:  User-Password       [2]   18  *
Jun 21 14:27:41.084 CEST: RADIUS:  Service-Type        [6]   6   Outbound                  [5]
Jun 21 14:27:41.084 CEST: RADIUS:  NAS-IP-Address      [4]   6   172.x.x.x
Jun 21 14:27:41.088 CEST: RADIUS: Received from id 1645/62 172.x.x.x:1812, Access-Accept, len 148
Jun 21 14:27:41.088 CEST: RADIUS:  authenticator D6 AB CC 2F 8B 3F 02 31 - CC 40 2C 6D BB B2 F2 80
Jun 21 14:27:41.088 CEST: RADIUS:  Service-Type        [6]   6   Outbound                  [5]
Jun 21 14:27:41.092 CEST: RADIUS:  Vendor, Cisco       [26]  34
Jun 21 14:27:41.092 CEST: RADIUS:   Cisco AVpair       [1]   28  "outbound:addr=172.x.x.x"
Jun 21 14:27:41.092 CEST: RADIUS:  Vendor, Cisco       [26]  42
Jun 21 14:27:41.092 CEST: RADIUS:   Cisco AVpair       [1]   36  "lcp:interface-config=dialer pool 1"
Jun 21 14:27:41.092 CEST: RADIUS:  Vendor, Cisco       [26]  46
Jun 21 14:27:41.092 CEST: RADIUS:   Cisco AVpair       [1]   40  "outbound:dial-number=0049xxxxx"
Jun 21 14:27:41.096 CEST: RADIUS(0000007C): Received from id 1645/62
Jun 21 14:27:41.096 CEST: Di15 AAA/AUTHOR/DIALOUT: Authorization success for user test
Jun 21 14:27:41.096 CEST: %LSDialout: debug to verify the data integrity
Jun 21 14:27:41.100 CEST:     dial number = 0049xxxxx
Jun 21 14:27:41.100 CEST:     dialnum_count = 1
Jun 21 14:27:41.100 CEST:     force_56 = 0
Jun 21 14:27:41.100 CEST:     routing = 0
Jun 21 14:27:41.100 CEST:     data_svc = -1
Jun 21 14:27:41.100 CEST:     port_type = -1
Jun 21 14:27:41.100 CEST:     map_class =
Jun 21 14:27:41.100 CEST:     modem_script =
Jun 21 14:27:41.100 CEST:     system_script =
Jun 21 14:27:41.100 CEST:     ip_address = 172.x.x.x
Jun 21 14:27:41.100 CEST:     send_secret =
Jun 21 14:27:41.100 CEST:     send_name =
Jun 21 14:27:41.100 CEST:     send_auth = -1
Jun 21 14:27:41.100 CEST:     trunkgroup =
Jun 21 14:27:41.104 CEST:     auth_required = default, yes
Jun 21 14:27:41.104 CEST:     auth_type =

Thanks a lot!

1 REPLY
New Member

Large Scale Dialout (LSDO) alternative

Is there any other possibility/technology instead of LSDO?

.> Using Virtual-Profiles + AAA-Server for dialout?

377
Views
0
Helpful
1
Replies
CreatePlease to create content