Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Layer 2 Point to Point connection can ping but not anything else using 2911

Hllo all, i have a couple of questions,

I have a wan setup, 2 sites connected via a layer 2 point to point at COX.

network A can Ping everything on network B.  but that is it,  No rdp to the other servers. no telnet to the routers from A to B (or Vice Verse).

are ACL needed can I just allow everything through. all my static routes on the routers seem to be setup correctally.  and the firewalls on each side of the network have routes point to the other netowrks via point to point gateways(these are the 2911 on each precpective side)

What am I missing.  i can ping everything... but nothing else?  Please help:

Capture.JPG

2 REPLIES
New Member

Ever discover your issue?

Ever discover your issue?  This is exactly what's got me caught up right now. 

Thanks, 

Pat M

Hall of Fame Super Silver

There is a significant lack

There is a significant lack of useful information in the description of this problem. There are routes configured on the routers but we do not know anything about them. There are firewalls but we do not know anything about what policies they are using. It is a point to point layer 2 connection, but we do not know anything about how it was provisioned or whether it imposes any restrictions on traffic. So how are we supposed to provide any helpful suggestion?

HTH

Rick

400
Views
0
Helpful
2
Replies