Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

limit bandwidth to each customer

Hi all. I have a question that I think may not be uncommon. I have several customers that are connected into my dataceneter. I was wanting to limit each of their connection into our network, to regulate our own bandwidth. I would want to setup something to regulate maybe for example, 1 meg for one customer, 2 meg for a second customer, 3 meg for a third, and so on. Is it possible to do this on one interface of a router? Any help would be appreciated. Thanks.

3 REPLIES

Re: limit bandwidth to each customer

it all depends how are the customers terminated.

if they each have a dedicated physical port or vlan, you can apply a policy map.

this can be done outbound / inbound.

HTH

Sam

New Member

Re: limit bandwidth to each customer

Yeah, they would be vpn'ing into our firewall (ASA), and we forward on appropriately. Can you rate according to each vpn?

Re: limit bandwidth to each customer

I don't have much experience with FWs, but depending on how u are configured, this document shows few examples.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

HTH

Sam

121
Views
0
Helpful
3
Replies