Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Link using EVDO Axesstel Modems.

I have a remote Router connected to an EVDO Link using an Axesstel Modem that connects to a Local Router that authenticates the Remote Router

into its domain and establishes an L2TP tunnel. Like so:

L2TP Tunnel and Session Information Total tunnels 1 sessions 1

LocID RemID Remote Name State Remote Address Port Sessions L2TP Class/

VPDN Group

1330 137 PDSN est 1701 1 1

LocID RemID TunID Username, Intf/ State Last Chg Uniq ID

Vcid, Circuit

189 4470 1330 labevdo@bod.c, Vi2.1 est 00:06:46 208

I established a tunnel interface on each of the Routers (Remote and Local) so that in a way it can be the WAN interface of each Router where they

know each other and so on.

I need to send EIGRP through the EVDO Link using the Axesstel. When I publish the network of the Remote Tunnel Interface or the Local Tunnel Interface

the L2TP tunnel that is established by EVDO stops working.

If anyone knows or have experience with EVDO Axesstel Modems (their use and limitations) please give recommendations on what I should do

to solve the problem. Thanks.


Re: Link using EVDO Axesstel Modems.

Did you check whether the eigrp process itself has started or not?