Re: load balance between two different Internet links, two diffe
In my previous post, I said
Main Site's static
188.8.131.52 - 184.108.40.206
220.127.116.11 - 18.104.22.168
22.214.171.124 - 126.96.36.199
0.0.0.0/0 (higher AD)
routing always take the longest match (more specific), if you put /4 block into your routing table, any routes to those network will prefer DR, correct? As a result, your are routing 50% of the IPv4 block to DR while the other 50% (without the longest match) will take the default at the Main site. The higher AD at DR is the back up if the Main site is down (for the 50% without the longest match).
I am saying per packet in your situation will not work (NAT'ed with 2 different sets of public IP). Per flow should work, but you will not able to achieve 50/50.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...