My customer has subscribe to two ISDN line on a single router for backup in the event the main lease line is down, he is asking if internal traffic can be load balance on the two line? for Example http traffic to route through ISDN 1 and smtp traffic to route through ISDN 2?
what Cisco command can I used to set up such design method?
You can use route map to implement above scenario. First of all you should make two extended access-lists, one for http and other for smtp traffic then this access list will match in route map. I n route map you should use " set ip-next hop " or " set ip interface " to route http traffic from ISDN1 and smtp traffic from ISDN2.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...