One option is to run a routing protocol and announce the same routes via both A and B. Depending on the proximity of a host to A or B, traffic for a particular host may flow via either A or B. In general, depending on your topology, you will be able to get a reasonable split of traffic between the two routers.
In my experience, HSRP has been extensively used in LAN setups with fast ethernet links. OSPF would give you much more control in terms of granularity and in terms of bandwidth consumption on the line. IMHO OSPF would be a better choice.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.