i have multiple E1 links. i need to load balance but this platform supports only per destination which does not fullfill the requirement. The voice is running on this network. If anyone has any idea do share.
Actullay there are multiple(8) point to point links between 7606's. In the peak times, one of the links are choked (95%) while other links are less utlized (60%). This cause the problem for voice calls which are on choked link and some time is not possible to connect a new calls.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...