Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

LOAD BALANCING TRAFFIC THE VOICE

Hi all,

I need take the load balance between link of different speed and I am facing some problem as:

In these liks we have voice and data traffic running with OSPF. I need take the load balance guaranteeing that the voice traffic it will pass through the main link.

Below is the configuration:

R5(config)#

track 1 interface Serial0/0.1 line-protocol

interface Ethernet0/0

glbp 1 ip 10.100.100.1

glbp 1 priority 252

glbp 1 preempt

glbp 1 weighting 252 lower 30 upper 100

glbp 1 load-balancing weighted

glbp 1 weighting track 1 decrement 230

R6(config)#

track 1 interface Serial0/0.1 line-protocol

interface Ethernet0/0

glbp 1 ip 10.100.100.1

glbp 1 priority 18

glbp 1 weighting 18 lower 10 upper 15

glbp 1 load-balancing weighted

glbp 1 weighting track 1 decrement 10

How could I take the load balance between voice and data, taking with the voice traffic it will be forwarding by main link?

Thanks

4 REPLIES
Super Bronze

Re: LOAD BALANCING TRAFFIC THE VOICE

One method would be use PBR to direct your voice traffic to your preferred path.

Community Member

Re: LOAD BALANCING TRAFFIC THE VOICE

How could I takes this?

The PBR direct the voice traffic through of source, destintation, match in voice traffic...???

Can you give example, please?

Thanks

Super Bronze

Re: LOAD BALANCING TRAFFIC THE VOICE

Community Member

Re: LOAD BALANCING TRAFFIC THE VOICE

Thanks for help!

The your suggestion it working!!!

I created the PBR directing the source traffic for destination that I wish.

Regards

286
Views
0
Helpful
4
Replies
CreatePlease to create content