Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Load Balancing

Which all are the routers can support ISP load balancing.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Load Balancing

In my opinion any Cisco router that support 2 WAN interfaces (speaking here about the connectivity serial lines, eth...) can support load balancing.

If you want Cisco router example, this is quite tricky, because of your budget, features and so on...

4 REPLIES

Re: Load Balancing

HI, [Pls RATE if HELPS]

What do you mean by ISP Load balancing ?

Any Cisco Router can support Load Balancing either by using a STATIC Method or with some Dynamic Routing Protocol.

All depends upon the amount of Traffic load in your Network and the Router capability to handle the same.

Hope i am Informative.

Pls RATE if HELPS

Best Regards,

Guru Prasad R

New Member

Re: Load Balancing

Actually i want to terminate two wan links (ethernet) on my router and also want to distribute my traffic through bothe the links. Which all the routers can support this.

Re: Load Balancing

In my opinion any Cisco router that support 2 WAN interfaces (speaking here about the connectivity serial lines, eth...) can support load balancing.

If you want Cisco router example, this is quite tricky, because of your budget, features and so on...

New Member

Re: Load Balancing

Very much "how long is a piece of string" one of the other guys can chime in here, but I can't remember if you can do load balancing using router on a stick (maybe I should test that)

Depending on your requirement you're looking at a 1800 series, or 2800 series possibly.

150
Views
4
Helpful
4
Replies