Hi there, we have a remote site with only ADSL2+ link for VPN tunnelling to the Head office, now users complains the links is slow but business is not going to invest for a lease line yet, since this is a small office only have a 4 users. I have looked at the Load Ballancing ADSL method, but since this is VPN tunnelling, it is assignded ip address from same subnet, I don't see t it is possible to setup Load Ballancing of mulitple ADSLs whith Tunnelinng confgured. Has one here expereicne same issue and any way to work around it?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...