Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Load Share/Fail Over on 2 isp

hi guys,

can i do these setup? i have two isp but im not using bgp. suggestions?

| --------ISP1

Router |

| -------- ISP2

Thanks.

jeff

3 REPLIES

Re: Load Share/Fail Over on 2 isp

I guess you could use some float static routes and use 1 as primary and 2 as backup. You'd use only a default route towards the ISP.

check this cool link:

http://avi.freedman.net/bw/may97.html

HTH,

if it does I'd appreciate if you'd rate this post.

Vlad

New Member

Re: Load Share/Fail Over on 2 isp

Hi Jeff

We are also using the failover between 2 wan links from different ISPs. For this we are using BGP. You can take the AS no. from them.

New Member

Re: Load Share/Fail Over on 2 isp

Hi,

For these setup no bgp config will be used. My problem maybe is when one connections is an E1 and the other is a dsl connection. Is these still possible ?

jeff

104
Views
0
Helpful
3
Replies