Re: Load sharing FR connection with ADSL connection
since you have CEF enabled, per-destination load-sharing is enabled (which is the default when configuring CEF). Depending on your destinations, traffic might be routed over the (slower, I would assume) frame relay link.
I am wondering if effective load sharing is possible in your situation, since you have a firewall that is doing NAT. What is connected to the other end of the frame relay connection ? Part of your internal network ? Can you try and route traffic for the specific networks (if they exist) at the other end of the frame relay connection out interface Serial0/0.1, and point all other traffic to the firewall, that is, leave the default route pointing to 220.127.116.11 as is ?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.