I'm using ASA 5510 as Firewall in my network and i want to add a second ISP link to split my bandwith.
First ISP use all kind of traffic , second ISP use HTTP Traffic Only.
I know that loadbalancing is not a supported configuration by Cisco ASA so i imagine an other solution. I join my LAN schema to this post. By analysing it , do you think it is possible to achieve what i want ?
Hi avb, In order for this to actually work, you will need a device doing NAT on the ISP2 connection. Is this being done at the ISP? If not, you will need another firewall or you will need to use multiple contexts on your existing 5510.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...