04-19-2007 10:43 AM - edited 03-03-2019 04:37 PM
I have two links of internet coming from diferents TELCO companies. Can I dritibuted my traffic on these links using 70% of bandwith and 30%?
Witch protocol or feature my router must perform to reach that. What other ways i can do this?
Thank you
04-19-2007 10:57 AM
Hi,
There are a couple of ways to achieve the same, I'm listing some of them as below:-
1. Buy a Radware device and it will take all the burden and you neednt do anything.
2. Run BGP and manage the traffic with the help of a device from FCP
3. Run GLBP and that will help to an extent.
HTH,
Regards,
Wilson Samuel
04-22-2007 10:04 PM
04-23-2007 04:13 AM
Actually there is no need for either BGP, PBR or radware to balance unequally, if you are suing NAT.
Just configure some selective supernet routes like 200.0.0.0 /7
And that will make a pseudo-balancing to work. It is up to you to find the right set of destinations that attains your goal of 30% on one link.
Hope this helps, if it does please rate this post!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: