Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Log Message "MWAM-DFC1-0-CORRECTABLE_ECC_ERR:"

hi, all

i got some problems, this is part of "show logging" output:

%MWAM-DFC1-0-CORRECTABLE_ECC_ERR: A correctable ECC error has occurred, A_BUS_L2_ERRORS: 0x0, A_BUS_MEMIO_ERRORS: 0x3C, A_SCD_BUS_ERR_STATUS: 0x80DC0000

should i do something for this ? i mean would  these errors cause  some more serious problems?

2 REPLIES

Log Message "MWAM-DFC1-0-CORRECTABLE_ECC_ERR:"

Hi,

i am also getting same errror on ciso 7609

Oct 25 01:56:28.447: %MWAM-CFC1-0-CORRECTABLE_ECC_ERR: A correctable ECC error has occurred, A_BUS_L2_ERRORS: 0x0, A_BUS_MEMIO_ERRORS: 0xFF, A_SCD_BUS_ERR_STATUS: 0x80DC0700

Oct 25 01:57:35.203: %MWAM-CFC1-0-CORRECTABLE_ECC_ERR: A correctable ECC error has occurred, A_BUS_L2_ERRORS: 0x0, A_BUS_MEMIO_ERRORS: 0xFF, A_SCD_BUS_ERR_STATUS: 0x80DC0700

MAX_R2#

New Member

Log Message "MWAM-DFC1-0-CORRECTABLE_ECC_ERR:"

Hello Tao & Satya,

Till now the memory correction is doing its job to rectify the ECC parity error and if the message is getting repeated then there is immediate need to reset the module to wiped out the Parity error. If after resetting the module still the error starts reflecting then there is immediate need to replace it.

Note:This is hardware error and is getting generated for the Line card 1 in both the cases and this not a IOS issue but rather it is the hardware condtion or a transient issue . And if you still have any further query please revert Image code and the module you are using so that it could further analysed.

Regards,

Sanjay

995
Views
0
Helpful
2
Replies