Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

login failed trap for Cisco Routers and Switches ?

Hi Experts,

can i configure an event,when someone fail to login or password while attemping to login into a router?

if yes, how can i get the oid of this trap?

ThankS

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: login failed trap for Cisco Routers and Switches ?

LR

The enhancement that you refer in the link you provided is a very nice feature. But at this point it is not the solution that Kiran is looking for. He specifically asks for SNMP traps which are not yet supported according to the link that you posted. Quoting a note from that link:

Note Currently, only system logging (syslog) messages can be generated for login-related events. Support for SNMP notifications (traps) will be added in a later release.

So it looks to me like the current alternatives are to do it through aaa authentication with an external server which can log successful and unsuccessful logins or to do it through syslog. But not yet available in SNMP traps.

HTH

Rick

5 REPLIES
Silver

Re: login failed trap for Cisco Routers and Switches ?

Re: login failed trap for Cisco Routers and Switches ?

Is ther any OID or will we get the trap message for login failed

Silver

Re: login failed trap for Cisco Routers and Switches ?

Hi,

If you have snmp-server enable traps configured then all snmp-server traps will be sent.

You will prob also be able to do this via aaa.

HTH

LR

Hall of Fame Super Silver

Re: login failed trap for Cisco Routers and Switches ?

LR

The enhancement that you refer in the link you provided is a very nice feature. But at this point it is not the solution that Kiran is looking for. He specifically asks for SNMP traps which are not yet supported according to the link that you posted. Quoting a note from that link:

Note Currently, only system logging (syslog) messages can be generated for login-related events. Support for SNMP notifications (traps) will be added in a later release.

So it looks to me like the current alternatives are to do it through aaa authentication with an external server which can log successful and unsuccessful logins or to do it through syslog. But not yet available in SNMP traps.

HTH

Rick

Silver

Re: login failed trap for Cisco Routers and Switches ?

Hi Rick,

Thanks for that,

Its good to know!

Cheers

LR

475
Views
0
Helpful
5
Replies
CreatePlease to create content