03-04-2008 06:53 AM - edited 03-03-2019 08:57 PM
Hi,
I have two MACpc in different LAN. how to config the router (or switch) so that they can communicate to each other
rdgs
03-04-2008 09:44 AM
Take a look at this link for detailed info on configuring appletalk on ethernet link:
http://www.cisco.com/en/US/docs/ios/12_4/at/configuration/guide/c3happle.html#wp1049264
HTH,
hieu
03-05-2008 09:26 AM
Hi,
the config is
appletalk routing
fastethernet 0
ip address 192.168.12.5 255.255.255.0
appletalk cable-range 69-69 69.128
appletalk zone Accounting
appletalk zone Personnel
fastethernet 1
ip address 192.168.24.5 255.255.255.0
appletalk cable-range 69-69 69.128
appletalk zone Accounting
appletalk zone Personnel
! config both MACpc with cable-range 69-69
! config both MACpc with 69.129 or 69.130
any missing?
rdgs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide