Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Making Logical Interface on WAN port

I am trying to make logical Interfaces on my Cisco 2811 Ethernet WAN port,

I will use two internet connections on this port,, both connections will be terminating on a layer 2 switch, D-Link, and the switch will be connected to the Router,

Is it possible?????

The router asks me to first make this port for ISL or 802.1q....

9 REPLIES
New Member

Re: Making Logical Interface on WAN port

Hello,

Yes it is possible to do this.

what i will suggest is that u can create a trunk between router and the the D-link switch. Please revert for any more clarification. Also put the logs in the next post, if u face any more issues

New Member

Re: Making Logical Interface on WAN port

can you please give me any example,,,

Hall of Fame Super Gold

Re: Making Logical Interface on WAN port

You need a switch with 802.1q VLAN support, it's quite possible the one you have doesn't do that, so get a cisco a linksys switch.

New Member

Re: Making Logical Interface on WAN port

ok.. lets assume that I have it... then....

should I configure it the same way we do Inter vlan Routing???

Hall of Fame Super Gold

Re: Making Logical Interface on WAN port

Yes.

Please remember to rate useful posts with the scrollbox below.

New Member

Re: Making Logical Interface on WAN port

ok,, sure,, let me check it out first..:-)

New Member

Re: Making Logical Interface on WAN port

Should I be able to configure Soft IPsec VPN on the router????

and the users will communicate with 2 live IPs,, I mean,, some users will use one , and the others will use the second one,,,

As well, I want to configure the site-to-Site VPN...

The main Objective is to use only one ethernet WAN Port...

Hall of Fame Super Gold

Re: Making Logical Interface on WAN port

You can do that.

If you have no experience in configuring routers, VPN etc, I recommend you hire a certified professional for safe results without business-affecting mistakes.

New Member

Re: Making Logical Interface on WAN port

:-)

I am CCNA Certified,,

Actually due to short down time, I want to complete the documentation first.. and want to ensure that this will work,

146
Views
0
Helpful
9
Replies