Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Highlighted
New Member

Management Interface on Cisco7606-S with Sup-2T module

I installed Sup-2T on C7606-S. The status light for the management port is on when a cable is plugged in but when I do show ip int brief, there is no management interface showing up. Am I missing something ?

TenGigabitEthernet1/1 192.168.119.2 YES NVRAM down down
TenGigabitEthernet1/2 unassigned YES NVRAM administratively down down
TenGigabitEthernet1/3 unassigned YES NVRAM administratively down down
TenGigabitEthernet1/4 unassigned YES NVRAM administratively down down
GigabitEthernet6/1 unassigned YES NVRAM administratively down down
GigabitEthernet6/2 unassigned YES NVRAM administratively down down
GigabitEthernet6/3 unassigned YES NVRAM administratively down down
TenGigabitEthernet6/4 unassigned YES NVRAM administratively down down
TenGigabitEthernet6/5 unassigned YES NVRAM administratively down down
Vlan1 unassigned YES NVRAM down down

 

 

 

92
Views
0
Helpful
0
Replies