many ATM cells and IP packets input, 0 OAM Cells input
I'm seeing a pvc which is showing ATM cells and IP packets in, but 0 OAM and 0 cells/packets output. Note that there are 2 other pvcs on the BVI and both of them seem to be working fine. This is PA-A3-T3 on 7206 VXR. My understanding is that if no OAM cells are received, then the pvc is down and shouldn't see any packets inbound. What would cause such an issue?
ATM3/0.5181 is down, line protocol is down
Hardware is ENHANCED ATM PA
MTU 4470 bytes, BW 40704 Kbit, DLY 190 usec,
reliability 255/255, txload 61/255, rxload 15/255
32792 packets input, 2320868 bytes
0 packets output, 0 bytes
65584 cells input, 0 cells output
0 OAM cells input, 2946 OAM cells output
AAL5 CRC errors : 0
AAL5 SAR Timeouts : 0
AAL5 Oversized SDUs : 0
Last clearing of "show interface" counters 08:08:43
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...