Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Many Request time out But....

But every thing same ok for me the ospf neigjbor is full and find the it serial point to point.

check the output....

Serial0/1/0 10.244.23.1 YES NVRAM

up up

Neighbor ID Pri State Dead Time Address Interface

10.244.23.5 0 FULL/ - 00:00:36 10.244.23.5 Serial0/1/0

But there is many CRC and I change the serial and I dont know why ...

5 minute input rate 0 bits/sec, 1 packets/sec

5 minute output rate 0 bits/sec, 1 packets/sec

10226 packets input, 752332 bytes, 0 no buffer

Received 0 broadcasts, 17606 runts, 0 giants, 0 throttles

18349 input errors, 742 CRC, 0 frame, 0 overrun, 0 ignored, 1 abort

10918 packets output, 816510 bytes, 0 underruns

router ospf 23

log-adjacency-changes

network 10.244.23.1 0.0.0.0 area 1

interface Serial0/1/0

ip address 10.244.23.1 255.255.255.192

encapsulation ppp

ip ospf network point-to-point

keepalive 10 3

end

1 REPLY
Hall of Fame Super Bronze

Re: Many Request time out But....

Hi,

Incrementing CRC errors is a sign of line trouble. Have you tried contacting your WAN carrier ?

__

Edison.

88
Views
0
Helpful
1
Replies
CreatePlease to create content