Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Marking RFC 1918 traffic for prioritization

The question is How do I mark 1918 traffic so my vendor can prioritize this traffic over 1918 traffic without messing up my voice traffic?

We have MPLS connectivity where the Public and Private (Voice and Data) traffic travel across the same WAN links.

One suggestion is to prioritize enterprise (1918) traffic over Internet traffic.

To accomplish this task, we have to mark the 1918 traffic on our router.

Would I add a class map to my existing policy map whic is applied to my interface using a service policy?

Any input is greatly appreciated.

.

4 REPLIES
Hall of Fame Super Gold

Re: Marking RFC 1918 traffic for prioritization

Before you do anything, are you sure that you MPLS provider supports different classes of service ?

Not all do.

New Member

Re: Marking RFC 1918 traffic for prioritization

Yes, the MPLS provider supports different class of service. They stated, if we can mark it, they can prioritize it. Today, we have four different planes.

Hall of Fame Super Gold

Re: Marking RFC 1918 traffic for prioritization

Then just look an example of DSCP marking.

You can use any criteria you like. Some voice traffic comes already marked.

Hall of Fame Super Bronze

Re: Marking RFC 1918 traffic for prioritization

ip access-list extended RFC1918

permit ip 10.0.0.0 0.255.255.255 10.0.0.0 0.255.255.255

permit ip 10.0.0.0 0.255.255.255 172.16.0.0 0.15.255.255

permit ip 10.0.0.0 0.255.255.255 192.168.0.0 0.0.255.255

permit ip 172.16.0.0 0.15.255.255 10.0.0.0 0.255.255.255

permit ip 172.16.0.0 0.15.255.255 172.16.0.0 0.15.255.255

permit ip 172.16.0.0 0.15.255.255 192.168.0.0 0.0.255.255

permit ip 192.168.0.0 0.0.255.255 10.0.0.0 0.255.255.255

permit ip 192.168.0.0 0.0.255.255 172.16.0.0 0.15.255.255

permit ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255

class-map RFC1918

match access-group name RFC1918

policy-map XXXX

class RFC1918

set ip dscp xxx

HTH,

__

Edison.

187
Views
13
Helpful
4
Replies