I have a Cisco 3750-x switch (license IP service) stack and SVI vlans per customer with one subnet each and the SVI is the gateway for my clients. My Internet connections are directly connected too an routed port on the C3750, the first one 100 Mbit and the second 200 Mbit.
Behind the C3750-x I have a second C3750-x stack and is connected with an trunked port-channel too the first one. This switch is connected too my servers and it all working fine.
Some customers has also an 100 Mbit connection, last week one of them had full 100 Mbit speed traffic.....
How can I manage my upload speed and set a max upload speed too 50 Mbit for some customers?
When I use it srr-queue bandwidth limit is for all traffic thats going to my Internet connection.
Can I use QoS and an ACL with source and destination at my SVI and how?
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...