I have a firewall --ssg-20-- front of my cisco 3950. I'd like to use 3 wan connection(the firewall has 5 ethernet port.i'm planning to use 3 for wan 1 for dmz and one for intranet connection) on my firewall but could not decide whether that is secure or not. If you could give some advice on topology design I'd appreciated it.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...