Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Maximum Bandwidth Supported by WIC

Hello

I have a point to point 2 Mbps connection on 1800 router. When i check the serial link status it show bandwith 1.54Mbps.

Can any one has an idea till what max. bandwidth is supported by WIC.? And what is the hardware for Bandwidth above maximum limit

3 REPLIES
Cisco Employee

Re: Maximum Bandwidth Supported by WIC

Hello,

Please take look that this link:

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b0858.shtml

HTH,Please rate if it does.

-amit singh

New Member

Re: Maximum Bandwidth Supported by WIC

It means that Each port support 8Mbps in synchronous mode.?

Does the use or not use of bandwidth command has any effect on the serial bandwidth

Re: Maximum Bandwidth Supported by WIC

Hi Shoeb

1544Kbps is the default config under the serial interfaces and you can change the same using bandwidth command.

Also its nothing to do with the data communication/transfer which happens through the serial port.

regds

136
Views
10
Helpful
3
Replies
CreatePlease to create content