Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Meaning of MGX Alarms

MY_MGX> dspports

List of ATM ports:

==================

Port PortType Line# Portenable Speed PortState

---- -------- ----- ---------- ----- ---------

14.1 UNI 1 UP 4830 Out of cell delineation

14.2 UNI 2 UP 4830 Out of cell delineation

No IMA ports are currently active

1 REPLY

Re: Meaning of MGX Alarms

Hello,

this means, that the ATM cells on your E1 were not found. You have an E1 unstructured and therefore the MGX searches for ATM cell headers (HEC Byte) every 53 Bytes and can´t find them.

Make sure the line is correctly connected and use parameters (structured, etc.) matching the connected device.

Hope this helps!

Regards, Martin

128
Views
0
Helpful
1
Replies
CreatePlease to create content