Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Measuring latency, packet loss, jitter

What is the best tool / application freeware to measure latency, packet loss, jitter between 2 6500's over a 10 gig single mode fiber wan link, basically just need a good 24 hour report on network performance for that link to prepare for SRDF deployment, thanks to all in advance.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Measuring latency, packet loss, jitter

I prefer to use IOS tools when possible and you can here. Take a look at IP Service Level Agreement (IPSLA). Here's a link for more info.

http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/12_4t/sla_12_4t_book.html

Hope that helps.

4 REPLIES

Re: Measuring latency, packet loss, jitter

I prefer to use IOS tools when possible and you can here. Take a look at IP Service Level Agreement (IPSLA). Here's a link for more info.

http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/12_4t/sla_12_4t_book.html

Hope that helps.

Re: Measuring latency, packet loss, jitter

Hi,

Thanks a lot for this invaluable information.

Regards,

Wilson Samuel

New Member

Re: Measuring latency, packet loss, jitter

Thanks for your response but unfortunately the 12.2.18SXD5 version I have on my 6500's does not include IP SLA.

Re: Measuring latency, packet loss, jitter

Another tool I use everyday is PingPlotterPro (pingplotterpro.com). It's not free but a very useful tool.

675
Views
4
Helpful
4
Replies
CreatePlease login to create content