Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Memory

please what is the actual/total memory on this switch.

SW1#sh ver

Cisco IOS Software, C3560 Software (C3560-IPSERVICES-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 19-Jul-07 18:15 by nachen

Image text-base: 0x00003000, data-base: 0x01300000

ROM: Bootstrap program is C3560 boot loader

BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)

SW1 uptime is 2 hours, 34 minutes

System returned to ROM by power-on

System image file is "flash:c3560-ipservices-mz.122-35.SE5/c3560-ipservices-mz.122-35.SE5.bin"

cisco WS-C3560G-24TS (PowerPC405) processor (revision D0) with 122880K/8184K bytes of memory.

Processor board ID FOC1316Z7Q5

Last reset from power-on

1 Virtual Ethernet interface

28 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

3 REPLIES
Super Bronze

Re: Memory

128 MB DRAM

New Member

Re: Memory

PLEASE EXPLAIN THIS PART.....

SW1#sh memory summary

Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)

Processor 1E131A4 94334556 13838976 80495580 78602960 79864996

I/O 7800000 8380416 3642196 4738220 4738220 4736768

Driver te 1200000 1048576 44 1048532 1048532 1048532

Super Bronze

Re: Memory

Interesing, I didn't find command documented in 3560 docs. However, should be similar to information seen here: http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf013.html#wp1126419

324
Views
0
Helpful
3
Replies
CreatePlease to create content