Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MFT drop and insert with SF and ESF

Who knows if it is possible and how it would work to drop and insert a T1 with SF channels from a PBX onto an ESF T1 for the WAN link using the connect statement and back to SF on the other router with MFT cards in 2600 and 7200 routers?

2 REPLIES
Blue

Re: MFT drop and insert with SF and ESF

im not sure this is possible as the framing has to be the same on both ends.

if there is another layer2 device in between that can translate the framing that might work.

New Member

Re: MFT drop and insert with SF and ESF

Is your ultimate goal to have tie lines between between the the two PBX for 4 digit dialing or voice mail?

Check out this document

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_c/vvftrunk.htm#wp1087358

Thanks

121
Views
0
Helpful
2
Replies
CreatePlease to create content