Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

pdu
New Member

migrating from 8510 msr

i do have this quistion

whish produkt line can I go to now I have 8510 with only 4 ports oc3stm1 mm and 4 port oc3stm1 sm but the 8510 is end og life best regards Peter

3 REPLIES

Re: migrating from 8510 msr

Hello Peter,

Currently the Cisco MGX 8800 Series Switches would offer ATM connectivity at OC3 rates (and above).

"Cisco MGX 8800 Series Switches"

http://www.cisco.com/en/US/products/hw/switches/ps1938/index.html

Check with the Product bulletins, which cards will offer the services you have in use.

If you have further questions, please provide more detailed information about the usage of the 8510 in your network.

Regards, Martin

pdu
New Member

Re: migrating from 8510 msr

Hi Martin thanks for your answer but all the atm module to the MGX is allso end off life best regards Peter

Re: migrating from 8510 msr

Hi Peter,

not all the cards, to my knowledge:

Cisco MGX 8850/8950 AXSM-XG ATM Switch Service Module - 155 Mbps (OC-3c/STM-1)

http://www.cisco.com/en/US/products/hw/switches/ps1938/products_data_sheet0900aecd8010c0bc.html

"Cisco MGX 8850 AXSM-E Enhanced ATM Switching Module"

http://www.cisco.com/en/US/products/hw/switches/ps1938/products_data_sheet09186a00800887a9.html

And also see:

"Cisco MGX 8850/B Advanced ATM Multiservice Switch"

http://www.cisco.com/en/US/products/hw/switches/ps1938/products_data_sheet0900aecd8026b1c4.html

The Products above are not EOL, EOS and such.

In addition you might have a look at

"Cisco MGX 8950 Multiservice Switch"

http://www.cisco.com/en/US/products/hw/switches/ps3873/products_data_sheet09186a00800a192c.html

which also offers OC3 ATM ports, but in fact is more the high end (up to 768 OC3 ports per chassis)

Regards, Martin

109
Views
0
Helpful
3
Replies