Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

missed buffers

from the result below, what i am loosing?. what is the remedy for this?.

Depot-rtr# show buffers

Buffer elements:

1118 in free list (500 max allowed)

20206063 hits, 0 misses, 1119 created

Public buffer pools:

Small buffers, 104 bytes (total 50, permanent 50, peak 134 @ 7w0d):

49 in free list (20 min, 150 max allowed)

9523187 hits, 13315 misses, 2986 trims, 2986 created

10584 failures (0 no memory)

Middle buffers, 600 bytes (total 25, permanent 25, peak 59 @ 3d04h):

23 in free list (10 min, 150 max allowed)

966089 hits, 7237 misses, 1321 trims, 1321 created

6168 failures (0 no memory)

Big buffers, 1536 bytes (total 50, permanent 50, peak 62 @ 7w0d):

49 in free list (5 min, 150 max allowed)

4178146 hits, 1636 misses, 460 trims, 460 created

1330 failures (0 no memory)

VeryBig buffers, 4520 bytes (total 10, permanent 10, peak 12 @ 7w0d):

10 in free list (0 min, 100 max allowed)

495 hits, 835 misses, 39 trims, 39 created

835 failures (0 no memory)

Large buffers, 5024 bytes (total 1, permanent 0, peak 3 @ 7w0d):

1 in free list (0 min, 10 max allowed)

40 hits, 795 misses, 625 trims, 626 created

795 failures (0 no memory)

Huge buffers, 18024 bytes (total 1, permanent 0, peak 3 @ 1w3d):

1 in free list (0 min, 4 max allowed)

39 hits, 756 misses, 624 trims, 625 created

756 failures (0 no memory)

Header pools:

Header buffers, 0 bytes (total 768, permanent 768):

256 in free list (128 min, 1024 max allowed)

512 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

512 max cache size, 512 in cache

2664492 hits in cache, 0 misses in cache

Particle Clones:

1024 clones, 0 hits, 0 misses

Public particle pools:

F/S buffers, 256 bytes (total 768, permanent 768):

256 in free list (128 min, 1024 max allowed)

512 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

512 max cache size, 512 in cache

0 hits in cache, 0 misses in cache

Normal buffers, 1548 bytes (total 768, permanent 768):

768 in free list (128 min, 1024 max allowed)

0 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

Private particle pools:

Serial0/0/0 buffers, 1536 bytes (total 64, permanent 64):

0 in free list (0 min, 64 max allowed)

64 hits, 0 fallbacks

64 max cache size, 32 in cache

55040656 hits in cache, 0 misses in cache

FastEthernet0/0 buffers, 1552 bytes (total 512, permanent 512):

0 in free list (0 min, 512 max allowed)

512 hits, 0 fallbacks

512 max cache size, 256 in cache

47477465 hits in cache, 0 misses in cache

FastEthernet0/1 buffers, 1552 bytes (total 512, permanent 512):

0 in free list (0 min, 512 max allowed)

512 hits, 0 fallbacks

512 max cache size, 256 in cache

256 hits in cache, 0 misses in cache

1 REPLY

Re: missed buffers

Check this link to interpret your show buffers output.

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a7b80.shtml

pls rate any helpful post if it helps!

HTH

Jorge

106
Views
0
Helpful
1
Replies