You can configure SPAN on your switch which needs a source port and destination port. Source por will be por which you want to monitor or potr whose traffic you want to capture and it is port 22 in your case.
Destination port you have to connect a machine with sniffer installed something like Wireshark where you can see all traffic passing through port 22.
THis link will give you more details about SPAN and how to confgure on your switch
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...