We have BGP enabled on our networks with SNMP enabled to trigger alerts in case of link up/ downs. What we observe is when BGP session goes Active (but interface is up), we do not get any alert from SNMP saying BGP status has changed. The SNMP configuration is as below. Would appreciate if you can let me know if there is anything missing or something required to the config to monitor BGP state changes. Thanks in advance.
We are using HPOV & Concord for monitoring. SNMP Host is already defined and we are getting the normal link up/ down alerts. However, I would like to know if there is any way in which BGP state changes can be tracked. I checked in the router logs and dont find any logs if BGP flaps/ goes down even though level 7 logging has been enabled for buffer (logging buffered 16384 debugging). Can you please let me know how informs would help? In case you have any document that explains this, please do share. Thanks!
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...