Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

More than 2 ISP links on cisco router with Folt tolenrance and load Balance

Dear all,

i checked the forum for the notes about connecting two ISP lines to a single router by using "IOS NAT Load-Balancing". Can this feature be used for more than two lines ??

Thanks and kind regards

Matthias

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: More than 2 ISP links on cisco router with Folt tolenrance a

Yes.

4 REPLIES
Hall of Fame Super Gold

Re: More than 2 ISP links on cisco router with Folt tolenrance a

Matthias

I am not clear exactly which implementation you are looking at. But I am confident that with appropriate modification it could be used for more than 2 lines. If you could provide details of what you are thinking about doing or the links that you found we may be able to give better answers.

HTH

Rick

Community Member

Re: More than 2 ISP links on cisco router with Folt tolenrance a

Rick,

the distance between our customer's site and the providers dslam-box is to big to get a higher bandwidth than 1 mbps. More significant solutions are to expensive.

So we need to find a moderately priced solution. My challenge is to find a solution for bundling 2,3 or 4 dsl-lines (each with 1 mpbs).

Does IOS-NAT-Load-Balancing support more than 2 links ??

Kind regards

Matthias

Hall of Fame Super Gold

Re: More than 2 ISP links on cisco router with Folt tolenrance a

Yes.

Bronze

Re: More than 2 ISP links on cisco router with Folt tolenrance a

Dear Matthias ,

I gree that we can do load balancing with more than two ISP lines .

Have a look in the following config . and in additional to this you can add NAT commands 2 or more interface in the same way

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml

Regards,

Haris

258
Views
0
Helpful
4
Replies
CreatePlease to create content