Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

MPLS Bandwidth provisioning

Dear Friends,

I would like to know how service provider do mpls port bandwidth provisioing for their mpls-vpn customers.for example a customer is having a last mile of 2M and want to have mpls port of 200K .what would be the config for that and where is it configured ,CE/PE?

thanks in advance.

V

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: MPLS Bandwidth provisioning

Vicky

The configuration would be done by the ISP on the PE router usually because the CE device is often administered by the Enterprise and not the ISP.

Shaping or policing would be used on the ISP PE router for that port to only allow 200K bandwidth. Usually the end customer also configures shaping on their end as well.

Jon

Cisco are currently donating money to the Haiti earthquake appeal for every rating so please consider rating all helpful posts.

2 REPLIES
Hall of Fame Super Blue

Re: MPLS Bandwidth provisioning

Vicky

The configuration would be done by the ISP on the PE router usually because the CE device is often administered by the Enterprise and not the ISP.

Shaping or policing would be used on the ISP PE router for that port to only allow 200K bandwidth. Usually the end customer also configures shaping on their end as well.

Jon

Cisco are currently donating money to the Haiti earthquake appeal for every rating so please consider rating all helpful posts.

Community Member

Re: MPLS Bandwidth provisioning

Echo Jon.

234
Views
0
Helpful
2
Replies
CreatePlease to create content