Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

MPLS EIGRP

dear all,

pls suggest for following points

sorry for attching jpg file because it difficult to draw topology in notepad

issue

i am getting all the vpnv4 routes on all PEs, i am able to ping vrf IP of another PE but i am not able to ping client end MPLS ip from another PE but its pinging from local PE, although routes are not learning at CE

pls find attached config notepads

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: MPLS EIGRP

Sourabh,

You are not redistributing BGP into eigrp on the PE routers. That is why your CEs are not receiving the remote routes. you need to add something like this on all PEs:

router eigrp 2101

address-family ipv4 vrf MGL

redistribute bgp 10 metric 10000 1000 255 1 1500

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
2 REPLIES
Cisco Employee

Re: MPLS EIGRP

Sourabh,

You are not redistributing BGP into eigrp on the PE routers. That is why your CEs are not receiving the remote routes. you need to add something like this on all PEs:

router eigrp 2101

address-family ipv4 vrf MGL

redistribute bgp 10 metric 10000 1000 255 1 1500

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
Community Member

Re: MPLS EIGRP

oh yes...thanks a lot for good observation..

100
Views
0
Helpful
2
Replies
CreatePlease to create content