If i want to carry l2vpn packets accross my backbone (with QinQ) and the IP MTU should be at a maximum of 1500 what is my MPLS MTU (Juniper routers) Is it correct if i say that my MPLS MTU should be 1534, im really confused about this how my ingress interface will handle these requests in conjuntion with the l2vpn header...
IP MTU 1500 (including 20 byte IP Header + 20 byte TCP Header)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...