Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MPLS route stuck, anyone have any thoughts on how to clear it?

The 10.0.40.0/24 route show static..

sw1.ms.nyc0#sho ip route vrf 11072 | i 10.0.40.0

B       10.0.40.0/25 [200/0] via 64.115.5.5, 00:34:41

S       10.0.40.0/24 [1/0] via 0.0.0.0, Vlan2105

It is no longer in the config

sw1.ms.nyc0#sho run | i ip route vrf 11072

ip route vrf 11072 0.0.0.0 0.0.0.0 10.200.1.1

ip route vrf 11072 10.0.0.0 255.255.0.0 Vlan2105

ip route vrf 11072 10.0.9.100 255.255.255.255 Vlan2105

ip route vrf 11072 10.0.9.150 255.255.255.255 Vlan2105

ip route vrf 11072 10.0.23.100 255.255.255.255 Vlan2105

ip route vrf 11072 10.0.23.150 255.255.255.255 Vlan2105

ip route vrf 11072 10.0.34.100 255.255.255.255 Vlan2105

ip route vrf 11072 10.0.34.150 255.255.255.255 Vlan2105

thanks!

Everyone's tags (3)
1 REPLY
Cisco Employee

MPLS route stuck, anyone have any thoughts on how to clear it?

Thats weird,

You can clear it with "clear ip route vrf 11072 A.B.C.D" command, where A.B.C.D is your prefix to be deleted.

Hope this helps.

Nik

440
Views
0
Helpful
1
Replies