MPLS Traffic Engineering Tunnels

[pramod]

How to configure MPLS Traffic Engineering Tunnels using static route! I created LDP sessions using static route but MPLS traffic Engineering Tunnels not forming ! Please help me..

[Nagendra Kumar Nainar]

Hi Pramod,

The below link will give you an idea about how to configure basic MPLS TE,

With OSPF as IGP:

-----------------

http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a0080093fd0.shtml

With ISIS as IGP:

-----------------

http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a0080093fcb.shtml

HTH,

Nagendra