We are using BGP as PE and CE routing protocol in MPLS VPN. We are using RR for VPNV4 Routes propagation. when ever the link fails and restoers, routes from the CE Router are being recived through BGP, but until and unless we do soft reset with RR,recieved VPNV4 routes are not being advertised.
Kindly let me know what could be the reason and what has to be done to resolve.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...